WOD MYP-3US is a 1 mil polyester film with 2 mils of silicone adhesive. Resists fumes and chemicals, and leaves minimum residue on removal. Allows visibility of circuitry after masking. Film will not break or split during application or removal. A protective tape, designed to perform well in all phases of masking operations during printed circuit board production. Industry standard plater’s tape. Protects surfaces from splashes and chemical fumes in tin/ lead stripping and gold tab plating.
Used for splicing silicone coated paper and films
Used as an outer wrap on coils, capacitors, motors, and transformers
Masking in electroplating, anodizing, and PC boards.
Adhesive: Silicone How are adhesives different?
Carrier/Backing: polyester (PET) film
Thickness: 3 mils (carrier, adhesive) What is mil thickness?
Adhesion: 30 ounces per inch (to stainless steel test panel)
Tensile Strength: 25 pounds per inch (longitudinal)
Service/Operating Temperature: Up to 220°C (350°F) (for 30 min.)
Core: 3" Diameter
Alternative to: Ideal 9190; Scapa 581; Permacel P-377; St. Gobain M741; 3M 8951.
Note: Specifications are those given by manufacturers and are not tested for accuracy.