WOD Tape
WOD Kapton Tape 2 Mil, Silicone Adhesive - 36 yards, High Temp. Resistant for Masking and Soldering, No Residue, PKT2
$255.68 - $913.68
| Quantity | Discount |
|---|
Zoom the image with the mouse
WOD Tape
WOD Kapton Tape 1 Mil, Silicone Adhesive - 36 yards, High Temp. Resistant for Masking and Soldering, No Residue, PKT1
Product Code:
PKT1-PA
Availability:
In Stock, 3 to 5 business days to slit/cut to width
Material:
Polymide (Kapton)
Adhesive:
Silicone
Thickness:
2.6 Mil
Length:
36 Yard
Adhesion:
23.8 oz/in
Tensile Strength:
>20.6 lbs/in
Elongation:
30%
Certification:
UL510, MIL-P-46112B
Low Temp:
N/A F
High Temp:
200 F
Core:
3 inch
Adhesive Side:
Single Sided
Dielectric Strength:
>4000V
Bulk Pricing:
Buy in bulk and save
Kapton Polyimide Film Tapes
Product Description
WOD PKT1 Kapton Polyimide Film Tape is a 1 mil electrical grade Kapton alternative POLYIMIDE film coated with a high performance silicone adhesive. It is a wave solder/hot air leveling tape used to protect gold contacts on printed circuit boards from molten solder during hot air wave solder leveling process. It is thin and conformable, with outstanding tear and abrasion resistance at elevated temperatures. Adhesive will thermoset to increase adhesion values.
WOD PKT1 Leaves minimal residue when removed after manufacturing process; reduces clean-up time and minimizes rejects. Permits observation of board during processing. Kapton Electrical Grade/Printed Circuit Polyimide Film Tape has excellent resistance to acids, oils, solvents, aging, staining and water immersion.
The Adhesive Employs a proprietary technology that results in extremely low electrostatic discharge at unwind and removal from the PWB. Conventional polyimide tapes can typically generate over 10,000 volts during use which can damage board mounted electronic components. WOD tape PKT1 overcomes this problem without any of the typical drawbacks of conventional "anti-static" or "static-free" tapes (e.g., variable adhesion and opaqueness).
Product Applications
- Primarily used in electrical insulation and gold finger protection.
- Protects gold tabs in circuit boards during soldering.
- Protects surfaces helping reduce replacement parts
- Used in electrical applications such as harness/coil wraps & separators, transformers & slot liners where good insulation & heat resistance are required.
Technical Properties
- Adhesive: High performance silicone How are adhesives different?
- Carrier/Backing: Electrical grade polyimide film
- Thickness: 2.6 mils (carrier, adhesive) What is mil thickness?
- Adhesion: 23.8 ounces per inch (to stainless steel test panel)
- Tensile Strength: > 20.6 pounds per inch (longitudinal)
- Dielectric Strength: > 4,000 volts
- Elongation: > 30%
- Service/Operating Temperature: 14°F to 392°F
- Specification Met: MIL-P-46112B; UL510 approved for flame retardance
- Core: 3" Diameter
Additional Information
Alternative to: Dielectric Polymer NT-590; Permacel P-221; 3M 5419, 5433; Shurtape 6325-01; Scapa 557; St. Gobain/Furon 2345-1; Dewal 304-1; Ideal 9321, IT-7170; TLC CT961; Specialty Tapes S2210; Lanmar 595-1; Chemfab 360-1S; Tesa 4428.
Note: Specifications are those given by manufacturers and are not tested for accuracy.
WOD Kapton Tape 1 Mil, Silicone Adhesive - 36 yards, High Temp. Resistant for Masking and Soldering, No Residue, PKT1
$229.36 - $606.86
| Quantity | Discount |
|---|
Kapton Polyimide Film Tapes
Product Description
WOD PKT1 Kapton Polyimide Film Tape is a 1 mil electrical grade Kapton alternative POLYIMIDE film coated with a high performance silicone adhesive. It is a wave solder/hot air leveling tape used to protect gold contacts on printed circuit boards from molten solder during hot air wave solder leveling process. It is thin and conformable, with outstanding tear and abrasion resistance at elevated temperatures. Adhesive will thermoset to increase adhesion values.
WOD PKT1 Leaves minimal residue when removed after manufacturing process; reduces clean-up time and minimizes rejects. Permits observation of board during processing. Kapton Electrical Grade/Printed Circuit Polyimide Film Tape has excellent resistance to acids, oils, solvents, aging, staining and water immersion.
The Adhesive Employs a proprietary technology that results in extremely low electrostatic discharge at unwind and removal from the PWB. Conventional polyimide tapes can typically generate over 10,000 volts during use which can damage board mounted electronic components. WOD tape PKT1 overcomes this problem without any of the typical drawbacks of conventional "anti-static" or "static-free" tapes (e.g., variable adhesion and opaqueness).
Product Applications
- Primarily used in electrical insulation and gold finger protection.
- Protects gold tabs in circuit boards during soldering.
- Protects surfaces helping reduce replacement parts
- Used in electrical applications such as harness/coil wraps & separators, transformers & slot liners where good insulation & heat resistance are required.
Technical Properties
- Adhesive: High performance silicone How are adhesives different?
- Carrier/Backing: Electrical grade polyimide film
- Thickness: 2.6 mils (carrier, adhesive) What is mil thickness?
- Adhesion: 23.8 ounces per inch (to stainless steel test panel)
- Tensile Strength: > 20.6 pounds per inch (longitudinal)
- Dielectric Strength: > 4,000 volts
- Elongation: > 30%
- Service/Operating Temperature: 14°F to 392°F
- Specification Met: MIL-P-46112B; UL510 approved for flame retardance
- Core: 3" Diameter
Additional Information
Alternative to: Dielectric Polymer NT-590; Permacel P-221; 3M 5419, 5433; Shurtape 6325-01; Scapa 557; St. Gobain/Furon 2345-1; Dewal 304-1; Ideal 9321, IT-7170; TLC CT961; Specialty Tapes S2210; Lanmar 595-1; Chemfab 360-1S; Tesa 4428.
Note: Specifications are those given by manufacturers and are not tested for accuracy.
Related Products
WOD Tape
WOD Polyester Tape, 2.5 Mil - Silicone Adhesive - 72 yards, High Temp. Resistant for Masking or Holding Application, PFT25CS
$430.52 - $609.12
| Quantity | Discount |
|---|
WOD Tape
WOD Polyester Tape, 3 Mil - Silicone Adhesive - 72 yards, High Temp. Resistant for Masking or Holding Application, PFT30BS
$658.75 - $861.79
| Quantity | Discount |
|---|
WOD Tape
WOD Polyester Tape, 3.5 Mil - Silicone Adhesive - 72 yards, High Temp. Resistant for Splicing, Masking or Holding Application, PFT35BS
$573.40 - $796.37
| Quantity | Discount |
|---|
WOD Tape
WOD Polyester Tape, 2.5 Mil - Silicone Adhesive - 72 yards, High Temp. Resistant for Splicing, Masking or Holding Application, PFT25P
$584.30 - $758.02
| Quantity | Discount |
|---|
Free Shipping & Returns
Free shipping on all Ground Orders
Free Samples
Try Our Products Before Buying Them
AutoShip
Save 25% on your first AutoShip