PVC Low Density Foam Tape, Gray - Weatherstrip Seal for Windows and Doors

Single Side Self Adhesive PVC Foam Weatherstrip Seal Tape

Product Description

WOD SSLDFT Single Coated Foam Tape is a low density, closed cell PVC foam tape in thicknesses of 1/16, 1/8, 3/16, 1/4, 3/8, 1/2, or 3/4 inches. It is a general purpose foam tape coated on one side with a high performance acrylic adhesive. The adhesive on this single-sided foam product is on the exposed side of the tape when you unwind it from the roll; the release liner is pulled away from the non-adhesive side of the tape. Good combination of flexibility and conformability with strength & wear resistance. Also has excellent weatherability and chemical resistance. Used in applications requiring positive seals on irregular surfaces or when flexibility and conformability to seal tight radius curves are critical considerations.

WOD SSLDFT Foam Tape is used extensively in the automotive, HVAC and construction industries to provide air & weather tight seals; for gasketing, cushioning, vibration control in speakers, vehicles, electronic components and door frames. Also for filling and sealing gaps around windows, doors, and car/SUV tops for better insulation. It is a clean, waste free substitute for liquid sealants. Please make note that this a closed cell foam product (to compress it 25% it requires 0.5 psi for the 1/16 inch thick and 4.0 psi for the 3/4 inch thick); it is not soft like an open cell foam product would be. It also complies with European RoHS directive 2002/95/BC.

Product Applications

• Absorbs shocks, cushions, deadens sound and eliminates excess vibration providing an excellent buffer between contact surfaces.
• Use in applications requiring positive seals on irregular surfaces or when flex and conformability to seal tight radius curves are critical considerations.
• Used to make a long life seal against air, moisture, light and dust penetration.
• For insulation in thermal, electrical and sound applications.
• Easy to install for windows or doors to Seal out drafts and humidity, and Keep out dust, insects and pollen
• Used extensively in the automotive, HVAC, and construction industries to provide air & weather tight seals; for gasketing, cushioning, vibration control in speakers, vehicles, electronic components, door frames, and more.

Technical Properties

• Adhesive: Acrylic
• Carrier/Backing: Low density closed cell PVC foam
• Release Liner: White siliconized paper
• Thickness: 1/16" inch (carrier, adhesive) What is mil thickness?
• Adhesion: >12 ounces per inch (to stainless steel test panel)
• Tensile Strength: >15 pounds per inch (longitudinal)
• Service/Operating Temperature: -4°F to 176°F
• Density: 6 to 10 pounds per cubic foot
• Force to compress 25%: 3.0 psi for 1/16" thick up to 4.0 psi for 3/4" thick
• Compression deflection (dependent on thickness): 1.0 to 2.5 psi
• Specification Met: European RoHS directive 2002/95/BC
• Core: 3" Diameter

Additional Information

Alternative to: Norton V700 series; Gaska V710 and V810; Novagard LD series.

Note: Specifications are those given by manufacturers and are not tested for accuracy.